CANNA COCO FEEDING

CANNA Coco feeding guidance

A manufacturer-based reference for CANNA Coco A & B — useful for initial mixing and EC/pH checks before adapting the program to the actual facility.

Coco A & BpH 5.5–6.2Vegetative + Generative

QUICK REFERENCE

Manufacturer baseline

These values come from CANNA's global product directions and are not a rigid formula for every facility.

Reference rate40 ml A + 40 ml B per 10 L water
Total ECApprox. 1.2–2.3 mS/cm including source-water EC
Recommended pH5.5–6.2
Crop stagesBase nutrient for both vegetative and generative phases
Critical ruleAdd A to water and mix first, then add B — never mix A and B concentrates directly
Important: Never mix CANNA Coco A and B concentrates directly together. Insoluble combinations can form before dilution.

MIXING ORDER

Mix in sequence

With A & B nutrients, mixing order matters as much as the amount used.

  1. Fill the reservoir with water first.
  2. Shake CANNA Coco A, add the required amount and mix thoroughly.
  3. Add an equal amount of CANNA Coco B and mix again.
  4. Allow the solution to combine, then check EC and pH before irrigation.
  5. Use the label/schedule as a baseline and adapt to water quality, cultivar, environment, irrigation strategy and plant response.

OFFICIAL GROW SCHEDULE REFERENCE

CANNA Coco manufacturer grow schedule

A full phase-by-phase reference from CANNA’s current COCO grow schedule. Use it as a manufacturer baseline, then adapt from source water, irrigation, drainage and plant response.

Manufacturer reference · 2026ml per 10 LEC mS/cm
Product / measureVegetative phaseGenerative phase
RootingIIIIIIIIIIIIVIVIV
D1-5D6-25W1W2W3W4W5W6W7W8W9
Light hours1818121212121212121212
Dosages in ml per 10 L
CANNA COCO A29293333333333332929
CANNA COCO B29293333333333332929
CANNA RHIZOTONIC4020202055555
CANNAZYM252525252525252525–50*25–50
CANNABOOST20**2020202020202020
CANNA PK 13/1415
CANNA CALMAG AGENT***0–110–110–110–110–110–110–110–110–110–110–11
EC / mS/cm
EC water***0.40.40.40.40.40.40.40.40.40.40.4
EC nutrition1.61.61.81.81.81.81.82.3****1.61.6
EC total2.02.02.22.22.22.22.22.72.02.00.4
* CANNAZYM may be increased to 50 ml/10 L when substrate is reused. ** CANNABOOST may be increased up to 40 ml/10 L through flowering for extra strength.
*** CalMag rate depends on source-water EC. This example assumes water adjusted to EC 0.4 mS/cm. **** The W6 EC figure includes the full 15 ml/10 L CANNA PK 13/14 dose.

Source: CANNA COCO Grow Schedule (2026). Recommended Coco pH: 5.5–6.2.

FACILITY CONTEXT

Reference, not a rigid formula

Appropriate EC and concentration can change with source-water EC, cultivar, crop stage, irrigation frequency, substrate volume, drainage and environmental conditions.

For commercial facilities, record input EC/pH, drainage behavior and plant response so adjustments are made from observed data rather than a single fixed number.

Manufacturer references: CANNA Coco A & B · CANNA Grow Guide · Grow Schedules

Need to adapt this to your facility?

Talk with CANNA Thailand about water quality, substrate, irrigation and crop stage.

LINEWhatsApp